Fabrication & Welding

Our magnetic lift assist are designed specifically for the customer's application and can allow for multiple magnetic contact point and par…

Square buddies are a unique and innovative tool designed to greatly improve the accuracy and quality of pipe fabrication.

The FX universal, on/off permanent lift magnets are ideal for a variety of manufacturing applications where you’re mostly lifting flat mate…

The FXC lift magnets have a round, multi-pole magnetic field designed for lifting flat, circular-shaped parts such as rings, sleeves, beari…

Flaig FXE Electronic Control Lift Magnets allow the operator to pick-up ferrous metal sheets/parts and safely release with the push of a bu…

Ideal for thin sheets or parts, tanks/containers, and thin-walled pipes that normally can’t be lifted with a permanent, on/off magnet. The …

The FXV on/off permanent lift magnets are ideal for handling 90° shapes like angle iron, square tubing, and hot parts.

This compact and fully automatic on/off electrically controlled lifting magnet by Ixtur creates a strong magnetic holding force with a perm…

On/Off Permanent Rare Earth Magnetic Welding Angles let welders set up, weld and quickly move on to the next project.

These powerful magnetic welding grounds have strong gripping power and magnetically attach to your ferrous metal work surface.

Magnetic Welding Squares are ideal for welders that need fast set-up and accurate holding of sheet stock or tubing.

The Magnetic Welding Wind Block is a portable wind screen and shield to protect welders and from flashing, sparks and other issues created …

Handy wristband and belt-clip magnetic nail and screw holders provide a safe and convenient place to keep fasteners and small tools.

Flexible Magnetic Flashlight Holders securely hold your flashlight while you work.

Keep all your air tools organized, neat and handy with this one-piece, Stainless Steel rack. Available in three different lengths with slot…

Powerful permanent magnet holds 4 inch diameter grinder wheels in horizontal or vertical positions, regardless of trigger location.

This powerful tool holder with magnetic base securely holds your impact wrench on the side of your workbench - keeping it safe from damage …

Keep your can, cup, bottle, lubricant spray, etc. right where you want it.

The powerful magnetic Spray Gun Holder sticks through many layers of paint to hold your spray gun right where you need it.

TIG gun holders with magnetic bases quickly and easily attach to any steel surface in your shop such as the welding table, welding machine …

IMI's industrial strength magnetic tool holders can hold even your heaviest tools. Not all tool holders are built the same. When you're cho…

MIG gun holders with magnetic bases quickly and easily attach to any steel surface in your shop such as the welding table, welding machine …

Strong, easy to use, On/Off switchable magnetic pry bar for material leveling and alignment also known as mismatch or high/low allowing for…

Air Spring Fanners have an air spring system that pushes the magnet inside toward the face of the fanner when air pressure is present and r…

Permanent Magnet Sheet Fanners with Air Knives allow for ferrous and non-ferrous sheets to be separated in stacking and destacking applicat…

The lightweight SheetSeeker® fanner is a breakthrough in magnetic sheet separation technology!

Our standard permanent and electromagnetic Sheet Fanners and Separators are designed to separate steel sheet stock.

Electromagnetic Sheet Fanners eliminate die-damaging, double-blanking problems in automated sheet handling operations. A powerful electroma…

Hold papers, prints, charts and more to steel desks, partitions, machinery, etc. The strong magnet will hold through many layers of prints.…

Maximize shear efficiency by utilizing the entire shear blade for uniform wear and perform angle cuts. On/Off magnets allow for fast setup …

Air Actuated Sheet Fanners have an air cylinder release system that allows you to easily and safely separate the fanner from the stack.

These powerful Rare Earth magnetic connection systems can be used to hold doors, tools and other items in both indoor and outdoor applicati…

This handy new magnetic pole tester provides an instant zero-delay magnetic pole indication. Just press the push-button to activate the bui…

Protect workers from cuts, slivers, nicks & burns! Use the Magnetic Sheet Handler for steel sheets, plates, hot or oily parts.

Hand held lift allows strong grip of parts with an easy to use trigger release.

Designed for retrieving broken drill bits from oil and water wells, the Heavy Duty Retriever captures metal objects from any wet or dry are…

The GripStick handtool magnetically retrieves hot parts out of presses and reduces employee injury

Remove steel parts from bins, boxes, kegs, tables or floors.

Long reach retrievers are great for picking up items fro the floor without having to bend or stoop.

Versatile, swivel-head design allows various pickup positions on the part, and the long handle enables the operator to safely grab pieces t…

The Magnetic Shop Sweeper works on hard floors or carpeted areas. This hand-held magnetic sweeper offers the ability to clean right up to t…

This magnetic sweeper is ideal for floors, parking lots and construction sites.

The Permanent Magnetic Yard Sweeper from Industrial Magnetics, Inc. can reduce costly tire damage and personal injury caused by nails, scre…

Adding a rubber bumper is faster than ever with a magnetic attachment.

J-Hooks hold cables, wires, tubing, etc. to steel walls, ceilings or beams. Powerful magnet can be mounted on the hook in either of two pos…

A portable, magnetic hook that lets you hang just about anything off any steel surface.

The Reversible Magnetic Hook provides a versatile hanging storage solution. the "Open" position allows for easy access and the "Closed" pos…

Control systems for electromagnetic workholding chucks.

Magnetic Conveying Rail utilizes powerful permanent magnets to hold ferrous parts such as steel containers, composite cans, lids and more f…

You are sure to find the exact magnetic chuck for the milling operations in your industry and your business among our high-quality milling …

Walker Magnetics is a pioneer and innovator in industrial magnetic chucks. For grinding operations, our electromagnetic or permanent chucks…

If your business uses rotary tables for precision machine work, you will need reliable rotary chucks. You can be completely confident in th…

These corrosion resistant "channel magnets" have magnetic holding force the full length of the magnet and come with pre-drilled, counter-su…

Weaver-Grips™ are a high-quality handle accessory for our KANT-TWIST® T-Handle Cantilever Clamps that provide a more comfortable grip and o…

KANT-TWIST® Round Handle Cantilever clamp's fine-tuning capability is perfect for precise control over the holding pressure on your materia…

This two-in-one tool is a clamp that features a weld ground on one of the clamp's jaws to provide welders a quick and easy part securing se…

The Padded Jaw of these KANT-TWIST® Cantilever Clamps gives you exceptional clamping force while helping protect delicate work piece surfac…

The Urethane Jaw of these KANT-TWIST® Cantilever Clamps gives you exceptional clamping force while providing a non-marring jaw to help prot…

The original KANT-TWIST® Cantilever Clamp has greater clamping power and is lighter than traditional C-Clamps. They won't twist, or walk of…

Quick Acting KANT-TWIST® Clamps are perfect for mounting to work spaces where regular clamping of work pieces are required to speed up your…

The deep reach throat of these KANT-TWIST® Clamps gives you a farther reach onto your material for better holding placement options.

Stainless Steel KANT-TWIST® Cantilever Clamps are designed for use in corrosive, sanitary or magnetic applications.

Vertical lift adapter allows you to lift steel from a horizontal to a vertical position, or vertical to horizontal.

Pre-engineered, certified, and ready-to-weld lifting lugs get your finished product to market faster by eliminating the time & expense of e…

Stay safe. This extremely powerful on/off permanent rare earth magnet lets you guide loads into position without being close.

Powerful permanent magnetic clamp securely holds water lines, cables, electrical conduit, etc. to steel walls, beams, or structures. They e…

Magnetic Tie-Downs offer fast, temporary, and portable holding of tarps, signs, banners, etc. to flat or round steel surfaces without havin…

MBX magnetic clamping blocks have opposite clamping sides when turned on. Designed to clamp workpieces to steel surfaces, such as machinery…

Battery Back-Up Units are used to provide 20 minutes of emergency power to the magnets in the event of an interruption of power to the cran…

The air-actuated Transporter® Low Profile (TPLP) magnetically transfers metal blanks, stampings, and parts in automated station-to-station,…

Permanent magnetic air-actuated release tooling/end effectors.

Air-actuated Goudsmit Magnetic Grabheads, also known as Magnetic Grippers or End Effectors, are perfect for robotic end-of-arm tooling appl…

Transporter® MagVac is a combination of vacuum technology and air-actuated magnetic tooling designed for lifting and holding ferrous steel …

Safety of a permanent magnet, controlled on/off of an electromagnet.

The Solid State Controller (SSC) is compatible with all of our heavy duty lifting electromagnets.

Bi-Polar Heavy Lift Electromagnets are ideal for handling bundles of pipe, tubing, rebar, bar stock, plate, structural shapes, castings, fo…

WRL Series Rectangular Heavy Lift Electromagnets are designed to lift plates, slabs and billets of all sizes.

Parallel Pole Electromagnets offer on/off capability and can be controlled in automated sheet metal handling applications.

Pocket Magnetizer/Demagnetizer for small shop tools such as screwdrivers and more.

Designed for stationary or portable use, Surface Type Demagnetizers provide continuous duty operation as work pieces pass over the demagnet…

The Walker Total-Coverage Series Magnets are designed to meet the special material handling needs required in precision flame, plasma, and …

IMI’s Loop Type Demagnetizers are designed with engineered efficiency and constructed to handle continuous duty applications.

Secure cables and wires with these powerful magnets. Fast installation without drilling holes.

Magnetically secure brooms, flashlights, spray cans, markers, PVC lines, electrical wires, etc. to any steel surface - without drilling!

Keep critical tools for the job handy with Rubber Vinyl Hose Clamps. Used to secure objects to any steel surface without drilling.

These compact, mobile, and self-contained lifting magnets for lifting flat loads utilize a heavy-duty, 12-volt battery for operation. They …

Permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slin…

A CER electromagnetic lifting magnet, pound for pound, is the least costly, but most powerful magnet available. Due to the deep penetration…

This "On/Off" Permanent Rare Earth Lift magnet built to last in a heavy-duty industrial work environment while providing all the safety fea…

These compact yet powerful rare earth PowerLift® lift magnets can be used on flat or round surfaces and contain an internal release on/off …

IMI's BasicLift™ Magnet is a permanent ceramic lift magnet for flat steel applications.

Switchable, lightweight, and powerful rare earth permanent lift magnets.

These compact, mobile, and self-contained lifting magnets for lifting round loads utilize a heavy-duty, 12-volt battery for operation. They…

The Part Picker magnet securely grips heavy or sharp parts and is ideal for picking parts off cutting tables, retrieving fallen parts, or h…

Designed to increase production and reduce product damage, magnetic palletizers & depalletizers provide a safe and efficient method of tran…

We are a proud distributor of Gorbel's Lifting Equipment and an integrator of Gorbel equipment such as the G-Force and Easy Arm™ into custo…

Butt weld clamps utilize two powerful Rare Earth magnets to securely hold work pieces during setting up.

Permanent-Electro Hybrid Rail is commonly used for automated conveying and transferring of steel sheets and parts in transfer conveyors.

Electromagnetic Rail is commonly used in automated systems for conveying, transferring, and lifting steel sheets and parts.

Magnetic Skate Rail is ideal for use in conjunction with Magnetic Transfer Conveyors. Magnetic Skate Rail is typically positioned on the ou…

Low Profile Conveyors from Industrial Magnetics are available in magnetic or non-magnetic models in a variety of sizes to meet your applica…

Pole reversal controllers from the FXL-C family not only reliably control our FXL magnetic chucks, but almost all electro-permanent magnet …

The Magnetic Hose Cord Hook/Holder provides a versatile storage solution for hoses, cords, ropes and many other items.

Our Magnetic PinFanners™ are designed to separate stacks of steel sheets or blanks on "Hex", "Round" or "T-Slot" pallets.

Smart-Mag® Alignment Pairs are encoded with a maxel pattern that allows the magnet pairs to self self align, rotate and lock in specified o…

Smart-Mag® Spring Pairs are encoded with a maxel pattern that will attract until they pass the zero-force transition point - a specific and…

Smart-Mag® kits feature popular Smart-Mag® samples for a hands-on feel of their unique capabilities and functions.

Max-Attach® Smart-Mags® are much stronger than regular magnets because most of the field has been moved to the front side of the magnet and…

Smart-Mags® Latch Pairs are encoded with a maxel pattern that repel each other until they pass through the zero-force transition point - a …

Matte white PVC laminated - great for sign making! Conforms to any contour. Can be cut, drilled or shaped

Flexible magnetic rubber magnetized with two or more poles along the length of the face, creating concentrated strength on the face of the …

Due to their tremendously high energy level, Rare Earth magnets are ideal for miniaturized applications. They offer high resistance to dema…

These extremely powerful Rare Earth magnetic latches are perfect for securing cabinet doors and mounting displays that can be taken down or…

Accessory hooks/holders are used for many storage needs such as: shovels, brooms, rakes, tools, hammers, etc.

Air-actuated cylinder release permanent magnet tooling/end effectors.

Our power supplies are designed for manual operation. Housed in a rugged vented steel enclosure, this power supply uses 120 VAC input and c…

Rectangular Electromagnets offer on/off capability and can be controlled in automated sheet metal handling applications.

Round Electromagnets offer on/off capability and can be controlled in automated sheet metal handling applications.

Permanent Magnetic Tooling/End Effectors with air-actuated magnet release mechanism. Transporter® Switch Series (TPS) Magnets are ideal for…

Our Powergrip Magnets are a fast, effective and affordable way to move and retrieve parts