FX0660Flaig FX Universal Lift Magnet
The FX universal, on/off permanent lift magnets are ideal for a variety of manufacturing applications where you’re mostly lifting flat material, but occasionally need to lift rounds.
Benefits
- On/off rare earth permanent magnet
- On/off handle only requires 90° rotation and locks at both on/off positions
- Durable, recessed metal nameplates, not stickers
- Corrosion-resistant, plated-magnet surface
- Heat resistant up to 180°F (82°C)
- 3:1 design factor
- 2018 ASME B30.20 BTH-1 Design Category B, Service Class 3
Specifications: FX0660
Height
6.2
Length
8
Weight
19
Bail Height
2
Bail Thickness
0.5
Bail Width
1
WLL- Working Load Limit
660
Handle Length
7.5
Magnet Height
3
Magnet Length
6.2
Magnet Width
3.4
Magnetic Pole Quantity
2
FX0660 Flat Plate Working Load Limit (WLL) in lbs (kg) & *Max Sheet Length Due To Sag For Material Thickness For Single Magnet Use
| SKU | 1/4" PLATE (6' Ln) | 3/8" PLATE (8' Ln) | 1/2" PLATE (8' Ln) | 3/4" PLATE (8' Ln) | 1" PLATE (10' Ln) | 2" PLATE (10' Ln) | 3" PLATE (10' Ln) |
|---|---|---|---|---|---|---|---|
| FX0660 | 355 (152) | 507 (230) | 660 (300) | 660 (300) | 660 (300) | 660 (300) | 660 (300) |
NOTE: Lifting Values for the Flaig FX Universal Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8’, use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Maximum sheet lengths are selected due to the sag characteristics of the specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release. CF = Consult Factory NA = Not Applicable (Magnets listed will not turn “ON” on specified material thicknesses.)
FX0660 Round Lifting Working Load Limit (WLL) in lbs (kg)
| SKU | Working Load Limit lbs(kg) | Diameter Range (in) | Minimum Thickness (in) |
|---|---|---|---|
| FX0660 | 330 (150) | 2 - 12 | 1/2 |
NOTE: Lifting Values for the Flaig FX Universal Magnets are stated at 33% of the actual value. Consult the factory before specifying these magnets for use on round materials. Round Item Lifting Values are based on ideal conditions. Length, wall thickness, diameter and surface can all affect the magnet’s performance.
Downloads
FX0660
More products for Lifting, Moving & Transferring
Flaig FXC Cylindrical Part Lift Magnet
3 variationsThe FXC lift magnets have a round, multi-pole magnetic field designed for lifting flat, circular-shaped parts such as rings, sleeves, beari…
Flaig FXE Electronic Control Lift Magnet
12 variationsFlaig FXE Electronic Control Lift Magnets allow the operator to pick-up ferrous metal sheets/parts and safely release with the push of a bu…
Flaig FXP Thin Sheet Lift Magnet
3 variationsIdeal for thin sheets or parts, tanks/containers, and thin-walled pipes that normally can’t be lifted with a permanent, on/off magnet. The …
Flaig FXR Round Part Lift Magnet
6 variationsThe FXR is recommended for when lifting round/curved surfaces such as shafts, thick walled pipe, or billet, but occasionally need to lift f…
Flaig FXV Angle Steel Lift Magnet
3 variationsThe FXV on/off permanent lift magnets are ideal for handling 90° shapes like angle iron, square tubing, and hot parts.
Ixtur Automatic Magnets
1 variationsThis compact and fully automatic on/off electrically controlled lifting magnet by Ixtur creates a strong magnetic holding force with a perm…
BUXR Lift Magnets
2 variationsThese compact, mobile, and self-contained lifting magnets for lifting round loads utilize a heavy-duty, 12-volt battery for operation. They…
BUXF Lift Magnets
4 variationsThese compact, mobile, and self-contained lifting magnets for lifting flat loads utilize a heavy-duty, 12-volt battery for operation. They …
Creative Lift Magnets
5 variationsPermanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slin…
CER Series Electro Lift Magnets
6 variationsA CER electromagnetic lifting magnet, pound for pound, is the least costly, but most powerful magnet available. Due to the deep penetration…
AdvantageLift Magnet
6 variationsThis "On/Off" Permanent Rare Earth Lift magnet built to last in a heavy-duty industrial work environment while providing all the safety fea…
PowerLift® Magnets
5 variationsThese compact yet powerful rare earth PowerLift® lift magnets can be used on flat or round surfaces and contain an internal release on/off …
BasicLift™ Magnets
3 variationsIMI's BasicLift™ Magnet is a permanent ceramic lift magnet for flat steel applications.
DynamicLift™ Magnet
2 variationsSwitchable, lightweight, and powerful rare earth permanent lift magnets.
I'd like to speak to a magnetics expert
Have questions you’d like to speak to an IMI team member about? Fill out the contact form with the information you have, and a member of our sales team will be in touch soon. We can’t wait to chat.
