FX Permanent Lift Magnets

Home / Mag-Mate / Lifting Magnets / FX Permanent Lift Magnets

Thank you for your patience while the video player is loading. You may need to have Javascript and Flash enabled to play and view videos.

FX Permanent Rare-Earth Lift Magnet Series

These on/off permanent lifts offer strength in a lightweight, compact package. Each line of lifting magnets in the FX family of products has been specifically designed for maximum performance by user application. The size, shape and dimension of the parts you'll primarily be lifting - whether flat, curved, or circular-shaped - will determine the best FX lift magnet for you.

On all magnets in the series, the unique handle design only requires a 90° rotation to either engage or disengage the magnet (versus the 120°or even 180°required on most on/off lifting magnets), making it easy for operators to use in applications where the magnet is lifting something from inside a bin or a deep trough. The handle also features a positive lock-on/lock-off mechanism that requires the operator to manually switch between the two states. This prevents the handle from being turned only partially on, or from being accidentally bumped to the “off” position and dropping the load pre-maturely.

ON/OFF, Rare-Earth Permanent Magnet
Handle locks in both the On & Off positions for safety
Lifts flat sheets or curved pipe
Heat resistant up to 180° F (82° C)
3:1 design factor
Meets 2018 ASME B30.20 BTH-1 Design Category B Service Class

FX Models:

FX - For primarily lifting thick, flat stock, with the occasional need to lift something curved, such as a pipe, shaft, or billet.

FXP - Mostly for thin sheets, tanks/containers and thin wall pipe

FXR - Mostly round/curved surfaces such as shafts, thick wall pipe, billets and occasional flat material

FXV- Mainly angle iron (90°), I-beam web location where you need the handle rotation higher and hot parts up to 482°F

FX lift magnets are manufactured by Flaig Magnetsysteme in Germany. IMI is the exclusive North American distributor.

Check out our other Flaig offerings

FXC Round Permanent Lift Magnets

These round-shaped, On/Off permanent lifting magnets are perfect for lifting circular parts, such as rings, sleeves, bearing housings, flange plates and end of billet/pipe/shaft pieces

FXE Perm-Electro Lift Magnet

FXE Lifts combine the cost-efficiency and safety of a permanent magnet with the controlled-release capability of an electromagnet!

Literature Download: FX Permanent Lift Magnets

Order Online - click the part number to add to shopping cart

Part No.	Working Load Limit (Lbs)	Working Load Limit (Kg)	Overall Length (in)	Magnet Height (in)	Magnet Width (in)	Overall Height (in)	Handle (in)	Weight (lbs)
FX Lift Magnets
FX - For Flats Sheets and Select Round Materials
FX0330	330	150	6.3	2.3	2.5	4.0	5.3	8
FX0660	660	300	8	3	3.4	6.2	7.5	19
FX1320	1320	600	11.3	3.7	4.4	7.4	9	42
FX2200	2200	1000	14.2	4.7	6	9.4	10.2	93
FX4400	4400	2000	18.5	6.6	9	12.3	16.1	254
FX6600	6600	3000	25.5	6.6	9	12.3	21	366
FXP - for Thin Sheets and Pipe
FXP0375	375	170	7.7	2.7	2.5	5.3	5.3	12
FXP0725	725	330	10.4	3.5	3.4	6.7	7.5	28
FXP1450	1450	650	13.8	4.2	4.4	8.0	9	58
FXR - for Round Material
FXR0220	220	100	6.3	2.7	2.7	5.2	5.3	9
FXR0500	500	225	8.0	3.5	3.8	6.7	7.5	21
FXR1000	1000	450	11.3	4.4	4.9	8.1	9.0	49
FXR1650	1650	750	14.2	5.6	6.7	10.3	10.2	108
FXR2650	2650	1200	18.5	7.5	9.7	13.1	16.1	280
FXR4000	4000	1800	25.5	7.5	9.7	13.1	21.0	402
FXV - for Beams, Angle Iron(90°) and Hot Parts
FXV0440	440	220	7.7	3.0	2.5	5.5	5.3	12
FXV0880	880	440	10.4	3.8	3.4	6.9	7.5	29
FXV1775	1775	800	13.5	4.5	4.4	8.3	9	62

Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.