Permanent Ceramic Lift Magnets for Flat Steel Applications
IMI’s new BasicLift™ Magnet is a powerful, no frills permanent ceramic lift magnet perfect for basic, flat steel lifting, angle iron, square tube and other lifting applications. Featuring a lightweight and durable Stainless Steel design, the BasicLift has a full width cam to release the magnet from the steel surface and a tall lift lug for easy use with crane hooks and slings.
The BasicLift offers a good value for your dollar with strong lifting capacity and basic lifting features.
- Full width cam release
- Large lift lug
- Lightweight Design
- Durable Stainless Steel Casing
- Heat resistant up to 300°F (148°C)
- 2:1 Design Factor
- Made In USA (USA M.A.D.E.™)
|Basic Lift Magnets|
|Part No.||Working Load Limit (lbs)||Overall Ln. (in)||Overall (in)||Overall (in)||Magnet Ln. (in)||Magnet Wd. (in)||Magnet Ht. (in)||Weight (lbs)|
|Working Load Limit in lbs & *Maximum Sheet Length Due To Sag For Material Thickness For Single Magnet Use|
|Part No.||3/16 Inch Thick (6 Feet Long)||1/4 Inch Thick (6 Feet Long)||3/8 Inch Thick (8 Feet Long)||1/2 Inch Thick (8 Feet Long)||3/4 Inch Thick (8 Feet Long)||1 Inch Thick (10 Feet Long)||3 Inch Thick (10 Feet Long)|
|Working Load Limit (WLL) Values for the BasicLift™ Magnets are stated at 50% of the actual value. We recommend when lifting sheets over 8', use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round WLL Values are based on ideal conditions. Consult the factory before specifying these magnets for use on round materials. *Max. sheet lengths are selected due to sag characteristics of specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles and roller cam to properly engage and release the part.|
|Basic Lift Spare Parts|
Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.