Flaig Chuck Pole Extensions

Standard Fixed Pole Extensions

Fixed pole extensions are used to pre-set the three-point support when used in conjunction with mobile pole extensions or to set inherently rigid, flat materials high. The magnetic chuck is protected from deterioration and defects by using a full complement of fixed pole extensions. The pole extensions can always be milled over when worn.

MP - Mobile Pole Extensions

Mobile pole extensions MP are screwed onto the magnetic poles with an Allen key. The surface of the MP pole extension is blasted and electrolytically nickel-plated. Mobile pole extensions are used to clamp workpieces over their entire surface without distortion. Via the inclined plane, the pole extension's upper part moves to the workpiece's level and stiffens it without pulling it down.

RMP - Round Mobile Pole Extensions

Mobile pole extensions of the RMP type are simply screwed onto the magnet plate by hand via the screwed-on threaded pin (M8 x 10 mm) onto the magnetic plate. The surface of the RMP pole extension is completely machined and chemically nickel-plated. Compared to the standard square pole extension, the magnetic power is approx. 20% higher than the standard square pole extension and the closed design largely prevents the intrusion of dirt and chips. The round design generates a purely vertical stroke. The clamping surface is sandblasted to increase friction.