BUX Battery Powered Lifting Magnets
These compact, mobile, and self-contained lifting magnets utilize a heavy duty, 12volt battery for operation. They are free of restrictive cords and wires and are extremely useful in areas where electricity in not available. The magnet can be operated with either the on-board controls, or with the included IR remote control, which operates up to 15' away.
BUXF - designed for flat material handling. These magnets can be used in many types of applications, such as the handling of plates, die blocks, machined components, castings, and forgings. Extremely useful throughout any plant, including shipping and receiving areas, storerooms, on cut-off saws, burning and welding tables, and with other machine tools such as grinders, shapers, drill presses and more.
BUXR - designed for round and flat material handling. In addition to flat stock, the unique bi-polar design of this model's pole shoes enables it to handle a wide variety of structural shapes and rounds, such as pipe, tubing, bar stock, billets, I and H beams, angle, and channel.
- The battery charger has automatic cut-off to prevent over-charging
- Audible warning alarm & flashing light indicates low battery
- Magnet cannot be turned "ON" if battery charge is too low
- Bail load sensor prevents magnet de-energization when suspended in air
- Dual push button release
- Single push button lift
- Remote has a pocket/belt clip
- Battery NOT included (AGM Lead acid, deep cycle battery)
Order Online - click the part number to add to shopping cart
Call for current pricing:
|BUXF and BUXR Lifting Magnets|
|Part No.||WLL - Working Load Limit (lbs)||Overall||Magnet||Bail||Weight (lbs)||Battery Part No|
|Height (in)||Length (in)||Height (in)||Width (in)||Length (in)||Thickness (in)||Opening Height (in)||Opening Width (in)|
|BUXF11000||11000||24-7/8||60||4-9/16||12||21 (Qty 2)||1||4-1/8||4-1/4||650||BAT27|
Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.