FXE Perm-Electro Lift Magnet
FXE Permanent-Electro Lift Magnets
The FXE line of lift magnets allow the operator to pick-up ferrous metal sheets/parts and safely release them with the push of a button. They're ideal for lifting applications that require fast cycle times - without the operator having to touch the load.
Combining the cost-efficiency and safety of a permanent magnet for load handling with the controlled-release capability of an electromagnet, the FXE uses virtually no energy and does not require a battery backup system.
A built-in load sensor prevents the load from being released until it's at rest and the fail-safe permanent magnet design securely holds the load in the event power is lost.
Pickup and release functions can be performed by using the wireless remote control or direct activation from the magnet's on-board control buttons.
All labels and controls are located on top of the magnet, which gives the operator easier access and visibility, allows the magnet to fit into tight spots, and limits the risk of damage to the controls.
FX lift magnets are manufactured by Flaig Magnetsysteme in Germany. IMI is the exclusive North American distributor.
Quick Reference:50 Series: Smooth surfaces • Smaller parts • Cutting table loading/unloading • Thinner metals
50L Series: Smooth Surfaces • Long narrow parts • C channel • I-Beam • Square tubbing
80 Series: Hot rolled steel • Black material • Flame cut • Shipyards • Thicker metals than 50 Series
100 Series: Rough surfaces • Casting • Forging • Slabs • Thick, heavy, large metalsLiterature Download: FXE Perm-Electro Lift Magnet
Order Online - click the part number to add to shopping cart
| FXE Permanent- Electro Lift Magnets | |||||||||
| Part No. | Working Load Limit (lbs) | Working Load Limit (Kg) | Magnet Length (in) | Magnet Width (in) | Overall Length (in) | Overall Width (in) | Overall Height (in) | Weight (lbs) | |
|---|---|---|---|---|---|---|---|---|---|
| FXE - 50 Series | |||||||||
| FXE0660-50 | 660 | 300 | 4.6 | 4.6 | 6.5 | 6.5 | 16.5 | 51 | |
| FXE1650-50 | 1650 | 750 | 9.6 | 4.6 | 11.7 | 6.5 | 9.8 | 60 | |
| FXE3525-50 | 3525 | 1600 | 22.2 | 4.6 | 24.4 | 6.5 | 10.6 | 124 | |
| FXE-50L | |||||||||
| FXE0880-50L | 880 | 400 | 9.5 | 2 | 11.5 | 3.75 | 17.75 | 51 | |
| FXE1320-50L | 1320 | 6000 | 14.6 | 2 | 16.5 | 3.75 | 17.75 | 68 | |
| FXE2200-50L | 2200 | 1000 | 24.7 | 2 | 26.8 | 3.75 | 17.75 | 97 | |
| FXE - 80 Series | |||||||||
| FXE2200-80 | 2200 | 1000 | 6.8 | 6.8 | 9.0 | 9.0 | 11.6 | 86 | |
| FXE5500-80 | 5500 | 2500 | 17.6 | 6.8 | 20.0 | 9.0 | 11.6 | 170 | |
| FXE8800-80 | 8800 | 4000 | 28.5 | 6.8 | 30.8 | 9.0 | 11.6 | 291 | |
| FXE - 100 Series | |||||||||
| FXE3525-100 | 3525 | 1600 | 8.7 | 8.7 | 11.7 | 11.7 | 13.6 | 181 | |
| FXE7000-100 | 7000 | 3200 | 14.5 | 8.7 | 16.3 | 11.7 | 14.0 | 340 | |
| FXE10600-100 | 10600 | 4800 | 27.6 | 8.7 | 30.6 | 11.7 | 15.8 | 445 | |
Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.