Spreader Beams
INDUSTRIAL SPREADER BEAMS FOR LIFTING
When lifting large steel shapes, such as off-center loads, round, rectangular or long items (I-beams), one lift magnet may not be enough. IMI’s Spreader Beams allow two or more magnets to be used at one time with only one lifting source. Magnets on a Spreader Beam keep your product level, reducing the height required to lift the load, providing a safer lift environment while reducing the time needed to move the load.
SBI Series Features
- Low cost spreader beams
- One-piece construction
- Multiple spreads plus center hole
SBC Series Features
- Beams 3 feet to 4 feet have 2 spreads
- Beams 6 feet to 10 feet have 3 spreads
- Swivel hooks with latches
- Designed and manufactured to ASME B30.20
SBCA Series Features
- Ideal where headroom is not limited
- Adds stability to lift
- Telescopic spreader beam
- Available with standard chain or wire rope rigging
- Complies with ASME standards
Contact for current pricing:
| Standard Spreader Beams (SBI and SBC Series) | ||||||||
| Capacity In Tons | Model Number by Outside Spread in Feet | Magnet Model To Use | ||||||
|---|---|---|---|---|---|---|---|---|
| 3 | 4 | 6 | 8 | 10 | ||||
| 1/2 | SBC-1/2-3 | - | SBC-1/2-4 | - | SBC-1/2-6 | SBC-1/2-8 | SBC-1/2-10 | PNL0250 CL0400 |
| 1 | SBC-1-3 | SBI-1-3 | SBC-1-4 | SBI-1-4 | SBC-1-6 | SBC-1-8 | SBC-1-10 | PNL0800 CL1000 VL0660 |
| 2 | SBC-2-3 | SBI-2-3 | SBC-2-4 | SBI-2-4 | SBC-2-6 | SBC-2-8 | SBC-2-10 | PNL1600 CL1500 VL1200 |
| 3 | SBC-3-3 | SBI-3-3 | SBC-3-4 | SBI-3-4 | SBC-3-6 | SBC-3-8 | SBC-3-10 | CL2200 PNL2500 CL3000 |
| 5 | SBC-5-3 | - | SBC-5-4 | - | SBC-5-6 | SBC-5-8 | SBC-5-10 | PNL5000 |
| Adjustable Spreader Beams (SBCA Series) | |||||
| Model Number | Capacity In Tons | Spread (ft) Min. - Max. | HR Headroom Min. - Max. w/chain (in) | Weight Beam & Hooks (lbs) | Chain Rigging Weight (lbs) |
|---|---|---|---|---|---|
| SBCA-2-4/6 | 2 | 4 - 6 | 48 - 57 | 70 | 9 |
| SBCA-2-6/10 | 6 - 10 | 72 - 88 | 85 | 13 | |
| SBCA-2-8/14 | 8 - 14 | 96 - 113 | 175 | 17 | |
| SBCA-2-12/20 | 12 - 20 | 132 - 166 | 245 | 23 | |
| SBCA-5-4/6 | 5 | 4 - 6 | 55 - 64 | 105 | 34 |
| SBCA-5-6/10 | 6 - 10 | 79 - 95 | 160 | 47 | |
| SBCA-5-8/14 | 8 - 14 | 102 - 126 | 205 | 61 | |
| SBCA-5-12/20 | 12 - 20 | 138 - 172 | 670 | 82 | |
Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Not recommended for painted or finish coated surfaces.